README This data file is published by the Movebank Data Repository (www.datarepository.movebank.org). As of the time of publication, a version of this published animal tracking dataset can be viewed on Movebank (www.movebank.org) in the study "Migration of Scottish-breeding common sandpipers (data from Summers et al. 2019)" (Movebank Study ID 642453013). Individual attributes in the data files are defined below and in the Movebank Attribute Dictionary, available at www.movebank.org/node/2381. This data package includes the following data files: Migration of Scottish-breeding common sandpipers (data from Summers et al. 2019).csv Migration of Scottish-breeding common sandpipers (data from Summers et al. 2019)-reference-data.csv TAGS_files_Summers_etal_2019.zip This contains csv files with output from the TAGS program indicating twilight selections (details below). These data are described in the following written publication: Summers RW, de Raad AL, Bates B, Etheridge B, Elkins N (2019) Non‐breeding areas and timing of migration in relation to weather of Scottish‐breeding common sandpipers Actitis hypoleucos. Journal of Avian Biology 50(1): e01877. https://doi.org/10.1111/jav.01877 Data package citation: Summers RW, de Raad AL, Bates B, Etheridge B, Elkins N (2019) Data from: Non‐breeding areas and timing of migration in relation to weather of Scottish‐breeding common sandpipers Actitis hypoleucos. Movebank Data Repository. https://doi.org/10.5441/001/1.9cj0t65k ----------- Terms of Use This data file is licensed by the Creative Commons Zero (CC0 1.0) license. The intent of this license is to facilitate the re-use of works. The Creative Commons Zero license is a "no rights reserved" license that allows copyright holders to opt out of copyright protections automatically extended by copyright and other laws, thus placing works in the public domain with as little legal restriction as possible. However, works published with this license must still be appropriately cited following professional and ethical standards for academic citation. We highly recommend that you contact the data creator if possible if you will be re-using or re-analyzing data in this file. Researchers will likely be interested in learning about new uses of their data, might also have important insights about how to properly analyze and interpret their data, and/or might have additional data they would be willing to contribute to your project. Feel free to contact us at support@movebank.org if you need assistance contacting data owners. See here for the full description of this license http://creativecommons.org/publicdomain/zero/1.0 ----------- Data Attributes These definitions come from the Movebank Attribute Dictionary, available at www.movebank.org/node/2381. animal ID: An individual identifier for the animal, provided by the data owner. This identifier can be a ring number, a name, the same as the associated tag ID, etc. If the data owner does not provide an Animal ID, an internal Movebank animal identifier may sometimes be shown. example: 91876A, Gary same as: individual-local-identifier animal life stage: The age class or life stage of the animal at the beginning of the deployment. Can be years or months of age or terms such as "adult", "subadult" and "juvenile". Units should be defined in the values (e.g. "2 years"). example: juvenile, adult units: Any units should be defined in the remarks. animal mass: The mass of an the animal. example: 500 units: grams animal reproductive condition: The reproductive condition of the animal at the beginning of the deployment. example: non-reproductive, pregnant data processing software: Name of the software program/s, scripts, etc. used to process raw sensor data and derive location estimates. example: BASTrack deploy off latitude: The geographic latitude of the location where the deployment ended (intended primarily for instances in which the animal release and tag retrieval locations have higher accuracy than those derived from sensor data). example: -38.6866 units: decimal degrees, WGS84 reference system deploy off longitude: The geographic longitude of the location where the deployment ended (intended primarily for instances in which the animal release and tag retrieval locations have higher accuracy than those derived from sensor data). example: 146.3104 units: decimal degrees, WGS84 reference system deploy on latitude: The geographic latitude of the location where the animal was released (intended primarily for instances in which the animal release and tag retrieval locations have higher accuracy than those derived from sensor data). example: 27.3516 units: decimal degrees, WGS84 reference system deploy on longitude: The geographic longitude of the location where the animal was released (intended primarily for instances in which the animal release and tag retrieval locations have higher accuracy than those derived from sensor data). example: -97.3321 units: decimal degrees, WGS84 reference system deploy off timestamp: The timestamp when the tag deployment ended. example: 2009-10-01 12:00:00.000 format: yyyy-MM-dd HH:mm:ss.sss units: UTC (Coordinated Universal Time) or GPS time, which is a few leap seconds different from UTC same as: deploy off date deploy on timestamp: The timestamp when the tag deployment started. example: 2008-08-30 18:00:00.000 format: yyyy-MM-dd HH:mm:ss.sss units: UTC (Coordinated Universal Time) or GPS time, which is a few leap seconds different from UTC same as: deploy on date deployment comments: Additional information about the tag deployment that is not described by other reference data terms. example: This deployment was excluded from analysis because the tag failed. deployment end type: A categorical classification of the tag deployment end. Values are chosen from a controlled list: captured: The tag remained on the animal but the animal was captured or confined. dead: The deployment ended with the death of the animal that was carrying the tag. equipment failure: The tag stopped working. fall off: The attachment of the tag to the animal failed, and it fell of accidentally. other released: The tag remained on the animal but the animal was released from captivity or confinement. removal: The tag was purposefully removed from the animal. unknown: The deployment ended by an unknown cause. deployment ID: A unique identifier for the deployment of a tag on animal, provided by the data owner. If the data owner does not provide a Deployment ID, an internal Movebank deployment identifier may sometimes be shown. example: Jane-Tag42 event ID: An identifier for the set of information associated with each record or event in a data set. A unique event ID is assigned to every time-location or other time-measurement record in Movebank. example: 6340565 units: none light level: Light-level values measured by a solar geolocator. example: 28 units: undefined same as: gls:light level manipulation type: The way in which the animal was manipulated during the deployment. Additional details about the manipulation can be provided using manipulation comments. Values are chosen from a controlled list: confined: The animal's movement was restricted to within a defined area. none: The animal received no treatment other than the tag attachment. relocated: The animal was released from a site other than the one at which it was captured. manipulated other: The animal was manipulated in some other way, such as a physiological manipulation. ring ID: A number or color scheme for a band or ring attached to the animal. example: 26225 units: none same as: animal ring id sensor type: The type of sensor with which data were collected. Values are chosen from a controlled list: acceleration: The sensor collects acceleration data. accessory measurements: The sensor collects accessory measurements, such as battery voltage. Argos Doppler shift: The sensor is using Argos Doppler shift for determining position. barometer: The sensor records air or water pressure. bird ring: The animal is identified by a ring that has a unique ID. GPS: The sensor uses GPS to find location and stores these. magnetometer: The sensor records the magnetic field. natural mark: The animal is identified by a natural marking. radio transmitter: The sensor is a classical radio transmitter. solar geolocator: The sensor collects light levels, which are used to determine position (for processed locations). solar geolocator raw: The sensor collects light levels, which are used to determine position (for raw light-level measurements). sex: The sex of the biological individual(s) represented in the Occurrence. Values are from a controlled list: m: male f: female study: The name of the study in Movebank in which data are stored. study site: The name of the deployment site, for example a field station or colony. example: Pickerel Island North tag ID: A unique identifier for the tag, provided by the data owner. If the data owner does not provide a tag ID, an internal Movebank tag identifier may sometimes be shown. example: 2342, ptt_4532 same as: tag local identifier tag manufacturer name: The company or person that produced the tag. example: Holohil same as: manufacturer tag mass: The mass of the tag. example: 24 units: grams tag model: The model of the tag. example: T61 same as: model tag readout method: The way the data are received from the tag. Values are chosen from a controlled list: satellite: Data are transferred via satellite. phone network: Data are transferred via a phone network, such as GSM or AMPS. other wireless: Data are transferred via another form of wireless data transfer, such as a VHF radio transmitter/receiver. tag retrieval: The tag must be physically retrieved in order to obtain the data. taxon: The scientific name of the species on which the tag was deployed, as defined by the Integrated Taxonomic Information System (ITIS, www.itis.gov). If the species name can not be provided, this should be the lowest level taxonomic rank that can be determined and that is used in the ITIS taxonomy. Additional information can be provided using the term taxon detail. example: Buteo swainsoni same as: species, animal taxon, individual taxon canonical name timestamp: The date and time a sensor measurement was taken. example: 2008-08-14 18:31:00.000 format: yyyy-MM-dd HH:mm:ss.sss units: UTC (Coordinated Universal Time) or GPS time, which is a few leap seconds different from UTC visible: Determines whether an event is visible on the Movebank Search map. Values are calculated automatically, with FALSE indicating that the event has been marked as an outlier by manually marked outlier or algorithm marked outlier. Allowed values are TRUE or FALSE. ----------- File TAGS_files_Summers_etal_2019.zip The .zip contains 10 .csv files. Each .csv contains data in the TAGS format, created by the TAGS web tool for selecting twilights to use for location estimation. As of the time of publication the TAGS web tool is available at https://tags.shinyapps.io/tags_shiny/. datetime: the date and time (UTC) in ISO 8601 format e.g. 2013-06-16T00:00:11.000Z light: light value measured by the tag* twilight: whether the record is selected as sunrise (1), sunset (2) or neither (0) interp: whether the light value at twilight was interpolated (logical, TRUE/FALSE) excluded: whether a twilight was excluded during manual inspection (logical, TRUE/FALSE) *Values in this file are log transformed during an earlier processing step and so may differ from the light levels stored in "Migration of Scottish-breeding common sandpipers (data from Summers et al. 2019).csv". ----------- More Information For more information about this repository, see www.movebank.org/node/15294, the FAQ at www.movebank.org/node/2220, or contact us at support@movebank.org.