README This data file is published by the Movebank Data Repository (www.datarepository.movebank.org). As of the time of publication, a version of this published animal tracking dataset can be viewed on Movebank (www.movebank.org) in the study "GreySeal_McConnell_UK" (Movebank Study ID 654043458). Individual attributes in the data files are defined below and in the Movebank Attribute Dictionary, available at www.movebank.org/node/2381. Metadata describing this data package are maintained at https://datacite.org. Data were cleaned by removing erroneous points based on number of satellites (retained locations >=5) and using the "residuals" field. This cleaning is described in Russell et al. (2015). This data package includes the following data files: GreySeal_McConnell_UK.csv GreySeal_McConnell_UK-reference-data.csv Data package citation: McConnell BJ (2019) Data from: State-switching continuous-time correlated random walks. Movebank Data Repository. https://doi.org/10.5441/001/1.m7j2263r These data are described in the following written publications: Michelot T, Blackwell PG (2019) State-switching continuous-time correlated random walks. Methods in Ecology and Evolution. https://doi.org/10.1111/2041-210X.13154 Russell DJ, McClintock BT, Matthiopoulos J, Thompson PM, Thompson D, Hammond PS, Jones EL, MacKenzie ML, Moss S, McConnell BJ (2015) Intrinsic and extrinsic drivers of activity budgets in sympatric grey and harbour seals. Oikos 124(11): 1462–1472. https://doi.org/10.1111/oik.01810 ----------- Terms of Use This data file is licensed by the Creative Commons Zero (CC0 1.0) license. The intent of this license is to facilitate the re-use of works. The Creative Commons Zero license is a "no rights reserved" license that allows copyright holders to opt out of copyright protections automatically extended by copyright and other laws, thus placing works in the public domain with as little legal restriction as possible. However, works published with this license must still be appropriately cited following professional and ethical standards for academic citation. We highly recommend that you contact the data creator if possible if you will be re-using or re-analyzing data in this file. Researchers will likely be interested in learning about new uses of their data, might also have important insights about how to properly analyze and interpret their data, and/or might have additional data they would be willing to contribute to your project. Feel free to contact us at support@movebank.org if you need assistance contacting data owners. See here for the full description of this license http://creativecommons.org/publicdomain/zero/1.0 ----------- Data Attributes These definitions come from the Movebank Attribute Dictionary, available at www.movebank.org/node/2381. animal ID: An individual identifier for the animal, provided by the data owner. This identifier can be a ring number, a name, the same as the associated tag ID, etc. If the data owner does not provide an Animal ID, an internal Movebank animal identifier may sometimes be shown. example: 91876A, Gary same as: individual-local-identifier attachment type: The way a tag is attached to an animal. Values are chosen from a controlled list: collar: The tag is attached by a collar around the animal's neck. glue: The tag is attached to the animal using glue. harness: The tag is attached to the animal using a harness. implant: The tag is placed under the skin of the an animal. tape: The tag is attached to the animal using tape. other: user specified deploy off timestamp: The timestamp when the tag deployment ended. example: 2009-10-01 12:00:00.000 format: yyyy-MM-dd HH:mm:ss.sss units: UTC (Coordinated Universal Time) or GPS time, which is a few leap seconds different from UTC same as: deploy off date deploy on timestamp: The timestamp when the tag deployment started. example: 2008-08-30 18:00:00.000 format: yyyy-MM-dd HH:mm:ss.sss units: UTC (Coordinated Universal Time) or GPS time, which is a few leap seconds different from UTC same as: deploy on date deployment ID: A unique identifier for the deployment of a tag on animal, provided by the data owner. If the data owner does not provide a Deployment ID, an internal Movebank deployment identifier may sometimes be shown. example: Jane-Tag42 event ID: An identifier for the set of information associated with each record or event in a data set. A unique event ID is assigned to every time-location or other time-measurement record in Movebank. example: 6340565 units: none latitude (decimal degree): The geographic longitude of a location along an animal track as estimated by the processed sensor data. Positive values are east of the Greenwich Meridian, negative values are west of it. example: -121.1761111 units: decimal degrees, WGS84 reference system same as: location lat longitude (decimal degree): The geographic longitude of a location along an animal track as estimated by the processed sensor data. Positive values are east of the Greenwich Meridian, negative values are west of it. example: -121.1761111 units: decimal degrees, WGS84 reference system same as: location long manipulation type: The way in which the animal was manipulated during the deployment. Additional details about the manipulation can be provided using manipulation comments. Values are chosen from a controlled list: confined: The animal's movement was restricted to within a defined area. none: The animal received no treatment other than the tag attachment. relocated: The animal was released from a site other than the one at which it was captured. manipulated other: The animal was manipulated in some other way, such as a physiological manipulation. sensor type: The type of sensor with which data were collected. Values are chosen from a controlled list: acceleration: The sensor collects acceleration data. accessory measurements: The sensor collects accessory measurements, such as battery voltage. Argos Doppler shift: The sensor is using Argos Doppler shift for determining position. barometer: The sensor records air or water pressure. bird ring: The animal is identified by a ring that has a unique ID. GPS: The sensor uses GPS to find location and stores these. magnetometer: The sensor records the magnetic field. natural mark: The animal is identified by a natural marking. radio transmitter: The sensor is a classical radio transmitter. solar geolocator: The sensor collects light levels, which are used to determine position (for processed locations). solar geolocator raw: The sensor collects light levels, which are used to determine position (for raw light-level measurements). study: The name of the study in Movebank in which data are stored. tag ID: A unique identifier for the tag, provided by the data owner. If the data owner does not provide a tag ID, an internal Movebank tag identifier may sometimes be shown. example: 2342, ptt_4532 same as: tag local identifier tag manufacturer name: The company or person that produced the tag. example: Holohil same as: manufacturer tag model: The model of the tag. example: T61 same as: model tag readout method: The way the data are received from the tag. Values are chosen from a controlled list: satellite: Data are transferred via satellite. phone network: Data are transferred via a phone network, such as GSM or AMPS. other wireless: Data are transferred via another form of wireless data transfer, such as a VHF radio transmitter/receiver. tag retrieval: The tag must be physically retrieved in order to obtain the data. taxon: The scientific name of the species on which the tag was deployed, as defined by the Integrated Taxonomic Information System (ITIS, www.itis.gov). If the species name can not be provided, this should be the lowest level taxonomic rank that can be determined and that is used in the ITIS taxonomy. Additional information can be provided using the term taxon detail. example: Buteo swainsoni same as: species, animal taxon, individual taxon canonical name timestamp: The date and time a sensor measurement was taken. example: 2008-08-14 18:31:00.000 format: yyyy-MM-dd HH:mm:ss.sss units: UTC (Coordinated Universal Time) or GPS time, which is a few leap seconds different from UTC visible: Determines whether an event is visible on the Movebank Search map. Values are calculated automatically, with TRUE indicating the event has not been flagged as an outlier by "algorithm marked outlier", "import marked outlier" or "manually marked outlier", or that user has overridden the results of these outlier attributes using "manually marked valid" = TRUE. Allowed values are TRUE or FALSE. ----------- More Information For more information about this repository, see www.movebank.org/node/15294, the FAQ at www.movebank.org/node/2220, or contact us at support@movebank.org.